PIN STRIPING RACING GREEN 14 STRIPES AT 7 MM X 41 CM INCLUDING SPACER

PRODUCT INFORMATION Give your bike a fresh and sporty touch with PIN Striping Racing. The edge strips are easy to apply and fit perfectly to the curve of the hoop. self-adhesive non-glossy and UV resistant weather and washer proof no removal required from the rim removable without residue width: 6mm Package content: 14 equal size circular segments (3 strips for each side of the, plus 1 stock strip per side), spacer pattern 17'' for application APPLICATION Preparation: Wheels must be dry, clean and free of grease and wax. For degreasing we recommend FOLIATEC.com cleaning wipes. The ideal application temperature is 20 degrees Celsius. Application: remove the paper from the carrier. Apply 3 single strips per side of the tire at the correct distance. To do this, use the included spacer pattern. After applying, press the strips firmly. Then carefully remove the transfer sheet. For a good finish, press the strips again with a soft cloth. ? Removal: Heat the strips with a hair dryer. Pick up the strips at one corner and pull them out slowly. Note: The PIN Striping Racing MOMWRVB70635500L HOMOLOGATION: VIA HUB: 72.3 IMPORTANT NOTICE: For the purchase of a complete set of wheels (4), the centering rings necessary for their installation will be included.