MATT WHITE LIQUID RUBBER CAR BODY 1 X 5L CANISTER

Ref: FO20851 Brand: Foliatec
€122.50
VAT included
Quantity
Out of stock

Check availability

Upcoming receptions
2024-04-22: 1:PR unidades
PRODUCT INFORMATION Our newly developed FOLIATEC.com Carbody Spray Film is the new generation of removable body coatings. Carbody Spray Film is not only suitable for professional and large surface applications on complete vehicles, but also for rims, mirrors, motorcycles and many more. FOLIATEC.com is one of the first producers to offer ready-to-spray metallic colors. Ready for use on spray nozzles between 2.0 and 2.5 mm, Carbody Spray Film can be applied like a normal lacquer on car bodies using a spray gun or our FOLIATEC.com spray system. And the best part: the applied coating can be easily removed at any time without any assistance tools. ready to use enough for partial coating of cars and full coating of two wheelers very good opacity attractive appearance and a smooth spraying result protection against scratches, salt, weather conditions and chipping on the original paint UV resistant applicable on any surface non-absorbent easy to remove 1 liter is enough for a max. of approx. 2 square meters Product tip: Optimal in combination with our Carbody FOLIATEC.com spray film thinner to adjust the viscosity. Green-Purple Magic Tip: We recommend applying two layers of black matte with a flash-off time of 10 minutes, then apply two layers of green-purple magic. Important: Matte black must be dry before applying Magic Green-Purple. Depending on the amount of thinner, it lasts approximately 3 hours. APPLICATION All parts of the car that can be easily removed must be disassembled. Mask all surfaces that should not be coated. Mask the rubber stamps with Easy Up Tape from FOLIATEC.com (item #79920). You should also protect the wheel casings and underside of the vehicle from spray mist. Clean and dry the surface to be sprayed, including edges, then degrease with FOLIATEC.com Body Spray Film Prefilter (item #79934). After cleaning, remove any remaining dust with a duster. Application with FOLIATEC.com Spray System: Apply FOLIATEC.com Carbody Spray Film in 4 to 5 generous coats. On horizontal surfaces (roof or hood), work at a slow pace and at level 1 or 2: set the quantity control on the spray gun handle to level IIII. On vertical surfaces, work at medium speed and level 2. If necessary, reduce the amount control on the spray gun handle. Only use in suitable workshops and garages. Reduce ventilation if working in a spray booth. Spray Gun Application: Apply FOLIATEC.com Carbody Spray Film in 4 generous coats at medium speed. Use a 2 to 2.5 mm spray nozzle with a pressure of 3 to 5 bar in a suitable spray booth. Flash for 10 minutes after each spray coating, done. Note: After 60 minutes, Carbody Spray Film is completely dry. After 24 hours, the vehicle is ready to drive again. For detailed information, please refer to the instruction manual.
FO20851

Data sheet

Color
BLANCO
CKC Auto Sport

Reviews

No customer reviews for the moment.

Write your review

MATT WHITE LIQUID RUBBER CAR BODY 1 X 5L CANISTER

Write your review

CKC Auto Sport

Products in the same category