^ Schroth Bolt On Brackets Are Very Unique And Have Specific Uses. Typically, the brackets necessary for the use of the harness are included with each strap. However, They Can Be Purchased Separately Because Each Bracket Solves Some Common Problems Associated With Certain Tape Installations. ^ The 01323 Kit is a Bolt-In Set for 3" Straps. It is designed in such a way that it can be bent with pliers to a specific angle to achieve a perfect harness installation. The most common use is for shoulder belts that need to Be Bolted On To A Harness Bar. You Will Need The 3 Bar Slides That Come With Your Shoulder Belts. If You Need Those Too, You Will Need The "Wrap Kit". ^ The 01324 Kit Is A Set Of Bolt On Brackets Which Are Usually Sewn On 2" Lap Belts. We Call It A "Rallye Fin" Kit Because It Usually Comes In Street Legal Rallye Style Belts. Just like the 01323 kit, it is designed to be folded. These parts are commonly used in Porsche applications where space for an eye bolt is insufficient. This bracket can be bolted to the car, then folded so that a snap-in bracket can be used to secure the harness to the bracket. We use these brackets in many applications where stock mounting locations do not leave enough space, or if the thread pitch is different from the eye bolts. ^ Kit 01326 Is A Rigid Bolt On Bracket For 2" Straps That Has A 3 Bar Slide Integrated Into It. This Eliminates The Need For Any Other Brackets On The Seat Belt As Well As Gives A Method Of Adjusting Seat Belts Safety Without Adjusters (Formula Style Belts Sometimes Come Without Back Adjusters). The Brackets Have A 10 Degree Angle To Be Allowed For. These Brackets Can Also Be Used For Hans Specific Shoulder Belts.2 X Bolt-In Bracket B 24.15.13 With Swivel Inserts and Washers For 3/8", 5/16", M10, + 7/16" Stop Bolts M8 Bolts
