FOLIATEC SPRAY SYSTEM POWERED BY WAGNER MAGIC GREEN-PURPLE 2X5L

PRODUCT INFORMATION FOLIATEC.com spray system: the revolutionary vehicle coating system! Our newly developed FOLIATEC.com Carbody Spray Film transforms your car optically in the blink of an eye. FOLIATEC.com is one of the first producers to offer ready-to-spray metallic colors. We offer in our useful DIY Carbody Spray Film Pro Set a package with a high quality FOLIATEC spray system powered by WAGNER, a world leading producer of devices for surface coating. The spray system was specially developed for the use of FOLIATEC.com Carbody Spray Film, so you can get started easily. And the best: the applied coating can be easily removed at any time without any tools. sufficient for complete vehicle coatings very good opacity attractive appearance and a smooth spray result protection against scratches, salt, weather conditions and chipping on the original paint UV resistant applicable on any non-absorbent surface easy to remove 1 liter is enough for a max . of approx. 2 square meters Pro set includes: FOLIATEC spray system with paint gun, compressor and 12 m hose - powered by WAGNER 2 x 5 liters CARBODY SPRAY FILM 2 x 500 ml THINNER 1 pair of disposable protective gloves Tip on green-purple magic: The professional set consists of 5l matte black and 5l green-violet magic (color change effect). We recommend applying two coats of matte black with a flash time of 10 minutes, then applying two coats of green-purple magic. Important: Matte Black must be dry before applying Magic Green-Purple. Depending on the amount of thinner, it lasts about 3 hours. * This offer cannot be combined with other discounts/promotions. APPLICATION All parts of the car that can be easily removed must be disassembled. Mask all surfaces that are not to be coated. Mask the rubber stamps with Easy Up Tape from FOLIATEC.com (Item #79920). You should also protect the wheel housings and the underside of the vehicle from spray mist. Clean and dry the surface to be sprayed, including edges, then degrease with FOLIATEC.com Body Spray Film Pre-Filter (Item #79934). After cleaning, remove any remaining dust with a feather duster. Application with the FOLIATEC.com Spray System: Apply FOLIATEC.com Carbody Spray Film in 4 to 5 generous coats. On horizontal surfaces (roof or hood), work at a slow pace and at level 1 or 2: set the quantity control on the spray gun handle to level IIII. On vertical surfaces, work at a medium rate and level 2. If necessary, reduce the amount control on the spray gun handle. Only use in suitable workshops and garages. Reduce ventilation if working in a spray booth. Spray Gun Application: Apply FOLIATEC.com Carbody Spray Film in 4 generous coats at medium speed. Use a 2 to 2.5mm spray nozzle at 3 to 5 bar pressure in a suitable spray booth. Flash for 10 minutes after each spray coating, done. Note: After 60 minutes, Carbody Spray Film is completely dry. After 24 hours, the vehicle is ready to drive again. For detailed information, please refer to the instruction manual.