PRODUCT INFORMATION With the NEON brake caliper and caliper you give your vehicle a very individual and sporty look. Permanently seals and preserves the surface and is resistant to chemicals, corrosion and oil. It has a long-lasting shine and is easy to clean. With the included base layer, our NEON caliper shows an extremely intense luminosity. 7-piece or 10-piece set (for NEON colors) heat resistant chemical, corrosion and oil resistant easy and exact application with a brush no need to disassemble any auto parts enough for 4 brake calipers Use colors NEON only with base coat included TIP: Now also applicable with a paint spray gun due to our new dilution. The brake caliper lacquer set includes: Brake cleaner, 400 ml and 125 ml paint, as well as 50 ml of hardener Steel brush, brush, spatula, 1 pair of disposable gloves NEON brake caliper set includes: Cleaner brake (400 ml) + Basecoat (125 ml) + lacquer (125 ml) + hardener (50 ml) 1 steel brush, 2 brushes, 2 spatulas, 1 pair of disposable gloves APPLICATION Remove the wheels. Clean the brake caliper with the included steel brush and the included Brake Cleaner. Mix the caliper paint and curing agent with the putty knife. For NEON colors: Shake off the white base coat with the putty knife and apply in a thin but well covered layer with the first fine brush. Use the second putty knife to mix the NEON caliper paint and curing agent. Mask off all parts except the caliper and apply the caliper with the brush. After painting the brake calipers let them dry, then put the wheel in place, done. For further instructions, read the APPLICATION sheet.