Our Universal 2C spray paint uses an innovative 2C system: the hardening agent is already in the can, which means you can say goodbye to awkward mixing. Simply pierce the curing agent cartridge with the push button, shake, and you're done! no need to paint, just spray on heat resistant chemical, corrosion and oil resistant no car parts need to be dismantled sufficient e.g. for 4 brake calipers Product Tip: Optimal in combination with our Brake cleaner for pre-cleaning of brake calipers. Application Shake can well before use. Remove the pressure button from the cap directly before spraying. Rotate the can 180° and place the push button on the pin at the bottom of the can. With the ball of your hand, press the push button as far as it will go. Shake can well again after activation (3 minutes). Note: After hardener is activated, can processing time is 5-6 hours. Due to lighting conditions in product photography and different display settings, the color of the product may not be reproduced authentically. Hazard note Danger: Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May produce an alergic reaction on the skin. May cause drowsiness or dizziness. If medical advice is needed, have product container or label at hand. Keep out of the reach of children. Read the label before use. Keep away from heat, hot surfaces, sparks, flames and other ignition sources. No Smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. IF IN EYES: Rinse carefully with water for several minutes. Remove contact lenses, if any and it is easy to do so. Continue with the rinse. Protect from sunlight. Do not expose to temperatures above 50°C/122°F. Dispose of contents/container in accordance with local/regional/national/international regulations. Repeated exposure may cause dryness or cracking of the skin. Explosive mixtures may form if there is insufficient ventilation. Contains isocyanates. May produce an allergic reaction. Contains acetone, hexamethylene diisocyanate, oligomers, n-butyl acetate, 2-methoxy-1-methyl acetate.