MIRROR STICKER WITH PIN BANDS

Small detail, big effect! Turn your mirror caps into eye-catching spots! It's easy to do with PIN Striped Mirror Caps. The decorative stripes are simply glued and ensure an individual look in no time. Mirror cap set for right and left suitable for many mirror caps self-adhesive, easy to apply car wash proof removable without leaving any residue available in four colors (red, black, white and yellow) heat resistant up to 90 ° C el package contains: 2 stripes (length 35.5 cm, width 1.3 cm) Application Thoroughly clean the surface of grease, dust and polish residue (e.g. with silicone remover) and dry with a cotton cloth. Separate the two decorative strips from each other and adjust to the size of the exterior mirror, shorten if necessary. Remove decorative stripes with the attached transfer film from the liner. Apply decorative stripes to the surface to be joined and press down with your thumb. Carefully remove the transfer sheet at a steep angle, the decorative strip will stick. To remove, heat the decorative stripe with a hair dryer. Lift the stripe piece by piece in one corner and slowly remove it.