MOTUL RADIATOR LEAK SEALANT

Radiator leak sealant for cooling system. Sealant additive to add to cooling systems. For all liquid-cooled cooling systems. MOTUL SEALS RADIATOR LEAKS is designed for use in radiators and closed cooling circuits (with expansion bottle) of all diesel and gasoline engines, whether naturally aspirated or turbocharged, with or without catalytic converter and with any type of fuel. MOTUL SEALS RADIATOR LEAKS effectively seals small pores and coolant leaks that could cause major problems. This product acts quickly and effectively in all types of closed, liquid-cooled cooling systems. MOTUL SEALS RADIATOR LEAKS can be used to seal water radiators and heat exchangers, water pump leaks, valves, loose connections and cracked coolant hoses, without causing blockages in the cooling system. Recommended for use in passenger cars and commercial vehicles, as well as in industrial heat exchangers. It can be used as a preventative or immediate action treatment. Compatible with all types of coolants (non-organic, hybrid, Lobrid and OAT). Provides perfect lubrication during the sealing process of the coolant circuit. MOTUL SEALS RADIATOR LEAKS, added to the engine cooling circuit, allows: - Sealing small pores and major leaks without clogging the cooling system. - Improving the performance of valves, thermostats and water pumps. - Improving control of engine temperatures. RECOMMENDATIONS Check the coolant level. Add MOTUL SEALS RADIATOR LEAKS to the coolant in the expansion tank of the cooling system, hot. Set all heater controls to the hot position. Let the engine run at idle for approximately 10 minutes. Check the coolant level again and check if the seal has been applied effectively. Caution: Open the expansion bottle cap slowly and carefully, as the system is pressurised and hot, so there is a risk of burns. A dose of 300 ml is sufficient for cooling systems with a capacity of up to 12 l. Never exceed the recommended proportion.