A flowable product that allows for free flow assembly as an alternative to an interference fit. In interference mounting, the bond strength increases by approximately 4 times. Allows a perfectly distributed load on the entire compromised surface. Eliminates stress within the joint, protecting it from fretting corrosion. permanent closure. It can also be used on threaded parts acting as a very strong threadlocker. High resistance to water, oils, fuels, hydraulic and refrigeration fluids, gases, vapors. Tested according to DIN 54452. Temperature range: -55°C to +150°C. Maximum diametral clearance: 0.1 mm. Storage at room temperature: 18 months minimum.