To hold bearings, bushings, gears, pulleys, sleeves, bushings, keys, pins and other non-removable cylindrical parts. For parts subjected to very high temperatures. Low viscosity product. For mounting free flowing parts as an alternative to interference mounting. In interference mounting, the bond strength increases by approximately 4 times. Get a perfectly distributed load on the entire compromised surface. Eliminates stress within the joint, protecting it from fretting corrosion. permanent closure. Used on threaded parts, it acts as an extremely strong threadlocker. High resistance to water, oils, fuels, hydraulic and refrigeration fluids, gases, vapors. Tested according to DIN 54452. Temperature range: -55°C to +175°C. Maximum diametral clearance: 0.15 mm. Storage at room temperature: 18 months minimum.