Product to lock bearings, gears, pulleys, sleeves, bushings, keys, pins and cylindrical parts in general that cannot be disassembled. Medium viscosity product for holding free flowing parts as an alternative to interference fit. In the interference fit, it increases the bond strength by about 4 times. Get a perfectly distributed load on the entire compromised surface. Eliminates stress within the joint, protecting it from fretting corrosion. permanent closure. Used on threaded parts, it acts as an extremely strong threadlocker. High resistance to water, oils, fuels, hydraulic and refrigeration fluids, gases, vapors. Tested according to DIN 54452. Temperature range: -55°C to +150°C. Maximum diametral clearance: 0.20 mm. Storage at room temperature: 18 months minimum.